Warning!
If you are stationary and want to change or operate the riding mode, sit in the riding position on the e-bike, as if you were about to set off, and apply the brakes with one hand.
Remember: applying the brakes cuts power to the motor, preventing it from starting and accelerating unexpectedly.
Always be in the riding position with the brakes applied before switching on an e-bike.
This prevents unexpected acceleration.
Riding modes
• Throttle mode — Ride the e-bike conventionally, using the throttle to engage motor acceleration whenever desired.
• Pedal assist mode — Ride conventionally while the Pedal Assist System (PAS) engages the motor automatically according to the assistance level and travel speed, helping the bike accelerate.
• Cruise mode — Use this mode only when already moving and when you want to maintain a slow, steady speed.
WARNING: DO NOT SELECT THIS MODE WHILE THE E-BIKE IS STATIONARY.
THIS WILL ENGAGE THE MOTOR AND CAUSE THE E-BIKE TO ACCELERATE UNEXPECTEDLY.
Odometer
Speedometer
Battery level indicator
Pedal assist level indicator
LCD on/off
Increase pedal assist level
Decrease pedal assist level
Cruise mode
Throttle mode
To select pedal/throttle mode, press S- until all the bars in the pedal assist level indicator disappear.
You can then ride the e-bike conventionally and use the throttle whenever desired to accelerate.
Pedal assist level indicator
Decrease pedal assist level
Throttle
Pedal assist mode
To select pedal assist mode, press S+ until a bar appears in the pedal assist level indicator.
Choose the desired level of assistance: use S+ to increase it and S- to decrease it.
The higher the assistance level, the more battery power is used.
In pedal assist mode, the motor starts automatically while you are riding and helps you accelerate.
Remember: whenever you apply the brakes, the motor automatically shuts off.
If you stop pedalling, the pedal assist system temporarily becomes idle until you start pedalling again.
Level 1
Level 2
Level 3
Level 4
Level 5
Pedal assist level indicator
Increase pedal assist level
Decrease pedal assist level
Cruise mode
Cruise mode is designed to be engaged only while you are riding the e-bike.
To engage cruise mode, press and hold CUR for 1 second until the cruise mode indicator appears.
To disengage cruise mode, either press and hold CUR or apply the brakes.
When the cruise mode indicator disappears, cruise mode is off.
Warning! Do not engage cruise mode while the e-bike is stationary.
Doing so will cause the e-bike to accelerate unexpectedly.
Cruise mode
Cruise mode indicator
Light indicator