— Leave a comment

E-bike speed limit: is 25 km/h still relevant?

25km

The e-bike speed limit raises a reasonable question: is 25 km/h still appropriate for today’s journeys? Before comparing performance, separate the bicycle’s actual speed from the assistance provided by its motor. This article explains the French framework and the relevant European regulation, then considers what a useful debate would need to examine. It is not a guide to the road laws of every English-speaking country.

What the e-bike speed limit refers to

In France, point 6.11 of Road Code article R311-1 defines a pedal-assisted cycle with an auxiliary electric motor rated at no more than 0.25 kW continuously. Its supply is progressively reduced and cut off at 25 km/h, or earlier when the rider stops pedalling.

Article 2(2)(h) of European Regulation 168/2013 excludes from its type-approval scope pedal-assisted cycles meeting its criteria: no more than 250 W continuous rated power, with assistance progressively reduced and cut off before 25 km/h or when pedalling stops. This exclusion does not amount to blanket approval for anything sold under the description “electric bike”.

Riding above 25 km/h without motor assistance

Switching off assistance does not mechanically lock the wheel. A rider can exceed 25 km/h through pedalling effort or on a descent without continued help from the motor. Applicable speed restrictions, signs and the need to ride appropriately for visibility and other road users still matter.

By contrast, a motor that continues to assist at 35 or 45 km/h is not describing an ordinary pedal-assisted cycle that is simply better equipped. Comparing the number on a display merges different situations. During a suitable test ride, assess the transition to unassisted pedalling, stability and braking rather than treating maximum speed as the only performance measure.

250 W means continuous rated power

The continuous rated power in the legal definition is not the battery capacity in watt-hours or an advertised peak power figure. These measurements answer different questions. A larger-capacity battery does not, on its own, change the bicycle’s regulatory category.

A single wattage figure is therefore not proof of compliance. Check the specifications and documents for the complete vehicle. With a conversion, controller behaviour, assistance operation and integration of the kit matter as well. A motor’s trade name or a setting selected on a display cannot replace an assessment of the actual configuration.

Faster vehicles need a separate classification

The French Road Code distinguishes, among others, subcategories L1e-A and L1e-B. Motorised cycles in those categories should not automatically be treated as the ordinary pedal-assisted cycle defined in point 6.11. Having pedals is not enough to establish a vehicle’s classification.

For a faster or more powerful model, establish its exact category, any required approval and the corresponding road access, equipment and insurance requirements using the competent official sources. This article does not infer them from speed or wattage alone. Outside France, consult the national and local rules too: translating a French discussion does not make it a local legal guide.

Should the rule change? Define the question first

The original version questioned the threshold by comparing e-bikes with road bicycles. That comparison raises an issue about use, but it does not establish that the law has changed or that a higher threshold would necessarily improve safety. Possible vehicle performance and permission to use it on public roads are separate matters.

A useful debate would identify the journeys, shared spaces, junctions and overtaking situations under discussion. It would compare evidence on actual use and collisions rather than turn an impression into a finding. No reform, campaign or statistical conclusion is announced here without a source. Questioning a rule is not the same as receiving a new permission to disregard it.

Six checks before choosing or converting a bike

  1. Identify the country and roads where the bike will be used.
  2. Check the declared category of the complete vehicle.
  3. Read the continuous rated power rather than relying on a peak figure.
  4. Confirm how assistance and its cutoff operate.
  5. Check category-specific requirements and installation compatibility.
  6. Assess braking, visibility, ergonomics and the actual route.

An assistance threshold is only one part of a bike’s usefulness. Smooth power delivery, gearing and comfort can matter more on hills or journeys with frequent stops. Use the conversion guide below to prepare a technical assessment. It contains no derestriction method and does not make a kit an approved road vehicle by default.

Guide and official texts

Leave a Reply

Your email address will not be published. Required fields are marked *